龙门分切机,高速分切机,全自动分切机,卷筒纸分切机
Hdfq-1800 computer controlled gantry high speed Slitter
 
I. parameters:
1. Applicable materials: all kinds of web paper, kraft paper, special paper, coated paper, silicone oil paper, release paper
2. Cutting width: 100-1700mm
3. Effective width: 500-1800mm
4. Mechanical speed: 400m / min
5. Cutting speed: 350m / min (depending on cutting material)
6. Cutting and alignment accuracy: ≤± 0.10 mm
7. Evenness of the end face of the cutting tray: ≤ ± 0.20mm
8. Unwinding diameter: ≥ 1000mm
9. Unwinding and locking: inflatable shaft loading: 3 ", 6"
10. Unwinding motor: 7.5 * 2 three-phase asynchronous servo motors
11. Winding diameter: 2 * 〝800mm
12. Winding and locking: 3 "inflatable shaft
13. Winding tension: automatic taper tension control
14. Main motor: 5.5kW three-phase asynchronous servo motor
15. Winding motor: 11kw * 2 three-phase asynchronous servo motors
16. Exhaust fan: 2.2kW high-pressure three-phase AC fan, waste suction mode
17. Overall power: 45KW
18. Deviation correction range: 100mm
19. External dimension: 8000 × 4800 × 2200mm (H)
20. Machine weight: about 6500kg
21. Working power supply: 380V ± 10% 50Hz ± 5%, three-phase five wire power supply.
Compressed air: clean, > 0.6MPa. Relative humidity of installation environment: 60% maximum.
Ambient temperature: 40 ° C max.
II. Configuration:
1) unwinding part: hydraulic lifting unwinding structure.
1. Effective unwinding width: 500mm-1800mm
2. Unwinding diameter: 1, 000mm
3. Unwinding and locking: Φ 3 ", Φ 6" inflatable shaft
4. Maximum tension: 50kg
5. Unwinding tension: motor braking, PLC joint control, with taper and dynamic automatic control.
6. Deviation correction system: LPC deviation correction system is adopted, sensor is used for side line detection, and electric actuator is used for driving.
7. Moving mode: linear bearing and platform moving.
8. Mechanical structure: steel plate
9. Loading locking: Pneumatic
2) traction part: pneumatic roller traction system
1. Traction motor: 5.5kW three-phase asynchronous servo motor
2. Transmission mode: synchronous belt transmission
3. Working mode of press roll: pneumatic press roll, dynamic and static balance treatment
4. Main traction roller: adopt ¢ 200mm hard chrome plated mirror roller, dynamic and static balance treatment
5. Meter and speed calculation of encoder, NEMICON company
3) cutting part: circular cutter system with swing pressure cutter structure
① upper round knife: ¢ 105mm (also straight knife cutting)
(2) lower round knife: ¢ 105mm, using spacer to match the knife
③ active mode: synchronous belt drive
4) exhaust system: adopt 2.2kW high-pressure three-phase fan to absorb waste
5) winding system: independent driving double shaft structure, with double tension mode of center surface.
1. Winding diameter: 2 × 10 800mm, end tidiness ≤ ± 0.20mm
2. Winding shaft: the inflatable shaft is 3 "to swing the unloading structure.
3. Maximum tension: 50kg
4. Winding tension: it is controlled by motor torque, with self-control of winding tension taper and operation dynamic tension control function.
5. Winding power: driven by 11kw * 2 three-phase asynchronous servo motor
6. Frequency converter: 11kw * 2, PLC joint control.
7. Winding drive: adopt arc tooth synchronous belt drive
8. Pressure structure: constant pressure mode, controlled by precision pressure regulating valve.
7) main control system: the main control unit is composed of PLC and weinview human-machine interface
8) low voltage appliance: Chint appliance
9) pneumatic components: adek
10) rolling element: C3 level inlet
11) transition guide roller: Φ 100mm duralumin alloy aluminum roller, dynamic and static balance treatment, hv700 type
III. main configuration list

Product name

Specification type

brand

Computer cutting machine

HDFQ-1800

LiCheng

 PLC programmable controller

S200

Siemens

 Touch screen

10"

WEINVIEW

Modular


Siemens

Asynchronous servo motor and drive motor

 

Beauty Department

 Frequency converter

 

YASKAWA

 Rectify deviation

Ultrasonic detector

Tung Deng

 Pneumatic components

 

AirTAC

 Rolling element

C3 (power level)

Imported

 Slitting mode

Straight or round knife

 

Inflatable shaft

 

Homemade excellence

 Synchronous belt

 

Italy production

 Flat leather belt

 

Italy production

 Linear guideway 25

 

Imported

 Electric control proportional valve

 

SMC

Precision pressure regulating valve

 

Imported

Button switch

 

Schneider

Charging device

Automatic loading without shaft or with shaft