分切复卷机、高速分切机、薄膜分切机、分切机厂家
Hdfq-1600 computer controlled high speed Slitter (for paper and film)



 
I. technical parameters:
1. Effective width: 100mm-1600mm
2. Mechanical speed: 400m / min
3. Cutting speed: ≤ 400m / min (depending on the specific situation of the material)
4. Unwinding diameter: ¢ 1000mm
5. Winding diameter: ¢ 600mm
6. Roll up locking: ¢ 3 "inflatable shaft or ¢ 6" inflatable shaft
7. Unwinding and locking: ¢ 3 "inflatable shaft or ¢ 6" inflatable shaft
8. Unwinding tension: 200N / M magnetic powder automatic control
9. Winding: asynchronous servo motor PLC joint control
10. Main motor: 5.5kw
11. Cutting and line alignment accuracy: ≤ ± 0.10 mm (no burr and bending of the tracked line)
12. Exhaust fan: 2.2kw
13. Deviation correction range: 100mm accuracy ± 0.5mm
14. External dimension: 3000 * 3300 * 1500mm
15. Working power supply: 380V ± 10% 50Hz ± 5%, three-phase five wire power supply. Compressed air: clean, > 0.6MPa.
The maximum relative humidity of the installation environment is 60%.
16. Machine weight: about 4000kg
II. Roll up function:
1. The machine adopts the unloading type winding device, which saves time and labor for automatic chain slide unloading.
2. The winding motor adopts asynchronous servo and PLC for taper automatic tension control.
3. The power transmission of winding adopts circular arc tooth synchronous belt transmission.
4. Support arm: pneumatic execution.
5. Pressure arm: constant pressure arm.
Traction system:
1. Traction drive: PLC automatic joint control
2. Traction roller group: ¢ 135mm Dingqing traction rubber roller, antistatic material, hardness shore
3. The traction combination can enhance the film conveying capacity and effectively cut off the unwinding tension and winding tension.
Unwinding function:
1. The unwinding of this machine is pneumatically locked.
2. Adopt the mobile deviation correction platform and the linear guide rail for positioning and sliding.
3. No shaft loading device
4. 200N. M magnetic powder brake is used for automatic control of tension taper.
5. Tension control: taper automatic controller PLC joint control.
6. Correction system: EPC ultrasonic correction system is adopted.
7. Linear guide rail: imported.
8. Mobile platform: steel plate structure.
9. Balance adjustment: equipped with manual left and right tension balance slider.
Cutter system:
1. This machine is equipped with round knife and straight knife device (optional)
2. Carry out the trimming device of the depth of the cutter, and carry out it pneumatically
3. Support shaft of cutterbed
4. Knife rest 10 pairs
5. Infrared tool setting
Reeling system: independent driving double shaft structure, with double tension mode of center surface.
1. Winding diameter: 2 × 10 600mm, end tidiness ≤ ± 0.20mm
2. Winding shaft: the inflatable shaft is 3 "to swing the unloading structure.
3. Maximum tension: 30kg
4. Winding tension: it is controlled by motor torque, with self-control of winding tension taper and operation dynamic tension control function.
5. Winding power: driven by 7.5kW * 2 three-phase asynchronous servo motor
6. Frequency converter: 7.5kW * 2
7. Winding drive: adopt arc tooth synchronous belt drive
8. Pressure structure: constant pressure mode, controlled by precision pressure regulating valve.
1) main control system: the main control unit is composed of PLC and weinview human-machine interface
2) low voltage apparatus: imported
3) pneumatic components: adek
4) rolling element: C3 level inlet
5) transition guide roller: Φ 100mm duralumin alloy aluminum roller, dynamic and static balance treatment, hv700 type
III. main configuration list

Product name

Specification type

       brand

Computer cutting machine

      HDFQ-1600

       liChen

PLC programmable controller

MOTION series

Siemens

Touch screen

10"

WEINVIEW

Modular

MOTION series

WEINVIEW

servo motor

 

YASKAWA

Frequency converter

MOTION series

YASKAWA

Rectify deviation

Ultrasonic detector

Precision control

Pneumatic components

 

SMC

Rolling element

C3 (power level)

Germany or Japan

Slitting mode

Straight or round knife

 

Air friction brake

 

Italy

Inflatable shaft

 

Homemade excellence

Tension controller

 

Taiwan

Synchronous belt

 

Italy

Flat leather belt

 

Italy

Linear guideway 25

 

Imported

Electric control proportional valve

 

SMC

Precision pressure regulating valve

 

Imported

Button switch

 

Schneider

Automatic feeding device

Shaftless hydraulic feeding

 

Automatic discharge device

Auxiliary pneumatic discharge