高速分切机,分切机,薄膜分切机,纸张分切机
Computer high-speed horizontal slitting machine

1、 Parameters:
1. Applicable materials: PE film, PVC film, pet tape, cable insulation paper, special paper, white board paper, kraft paper, base pulp paper, etc.
2. Cutting width: min. over 10 mm (depending on material)
3. Effective width: 900mm
4. Mechanical speed: 350m / min
5. Cutting speed 200m / min (depending on cutting material)
6. Cutting and alignment accuracy: ≤± 0.10 mm
7. Flatness of the end face of the cutting tray: ≤± 0.20mm
8. Unwinding diameter: ≥ 0.800mm
9. Unwinding and locking: inflatable shaft loading 3 "(76mm)
10. Unwinding tension: 10kg magnetic powder 200N
11. Winding diameter: ≤ 2 * 〝 500mm (depending on the width of the finished product)
12. Take up locking: inflatable shaft: 76mm
13. Winding tension: automatic taper tension control
14. Main motor: 5.5kW asynchronous servo motor
15. Winding motor: 4kw * 2 asynchronous servo motors
16. Exhaust fan: 2.2kW high-pressure three-phase AC fan, waste suction mode
17. Total power: 16kw
18. Correction range: 100mm
19. External dimension: 3000 × 2600 × 1500 mm (H)
20. Machine weight: about 4000kg
21. Working power supply: 380V ± 10% 50Hz ± 5%, three-phase five wire power supply.
Compressed air: clean, > 0.6MPa. Relative humidity of installation environment: 60% maximum.
Ambient temperature: 40 ° C max.
2、 Configuration:
This machine is suitable for slitting operation and rewinding of OPP, pet, CPP, PE, PS, PVC, various composite films, aluminized films and other materials. It is an ideal equipment in paper-making, plastic, printing and packaging industries.
1、 Technical parameters:
1. Effective width: 100mm-1300mm
2. Mechanical speed: 450m / min
3. Cutting speed: 300m / min (depending on the material)
4. Unwinding diameter: ¢ 1000mm
5. Winding diameter: ¢ 600mm
6. Take up locking: ¢ 3 ", ¢ 6" inflatable shaft (optional)
7. Unwinding and locking: ¢ 3 ", ¢ 6" inflatable shaft (optional)
8. Unwinding tension: air friction
9. Winding: asynchronous servo motor PLC joint control
10. Main motor: 7.5kW asynchronous servo motor
11. Cutting and line alignment accuracy: ≤± 0.10 mm (no burr and bending of the tracked line)
12. Exhaust fan: suction and blowing mode 2.2kw
13. Correction range: 100mm accuracy ± 0.5mm
14. External dimension: 3000 * 3300 * 1500mm
15. Working power supply: 380V ± 10% 50Hz ± 5%, three-phase five wire power supply. Compressed air: clean, > 0.6MPa. Relative humidity of installation environment: 60% maximum.
16. Machine weight: 4000kg
2、 Configuration:
Rewind function:
1. The machine adopts the unloading type winding device, which saves time and labor for automatic chain slide unloading.
2. The winding motor adopts asynchronous servo and PLC for taper automatic tension control.
3. The power transmission of winding adopts the circular arc tooth synchronous belt transmission.
4. Support arm: pneumatic execution.
5. Pressure arm: constant pressure arm.
Traction system:
1. Traction drive: PLC automatic joint control, asynchronous servo motor drive.
2. Traction roller group: ¢ 135mm Dingqing traction rubber roller, antistatic material, hardness shore
65 ° - 70 °: 1 piece
3. The traction combination can enhance the film conveying capacity and effectively cut off the unwinding tension and the rewinding tension.
Unwinding function:
1. The unwinding of the machine is pneumatically locked.
2. It adopts the mobile rectifying platform and the linear guide rail for positioning and sliding.
3. Manual auxiliary feeding device
4. Air friction as tension taper automatic control.
5. Tension control: taper automatic controller PLC joint control.
6. Correction system: EPC ultrasonic correction system is adopted.
7. Linear guide: inlet.
8. Mobile platform: steel plate structure.
9. Balance adjustment: equipped with manual left and right tension balance slider.
Cutter system:
1. This machine is equipped with straight knife device and round knife device
2. Fine adjustment device for cutting depth
3. Cutterbed support shaft
4. Knife rest 10
Reeling system: independent driving double shaft structure, with double tension mode of center surface.
1. Winding diameter: 2 × 10 600mm, end face tidiness ≤± 0.20mm
2. Reeling shaft: the inflatable shaft is 3 "swing the unloading structure.
3. Maximum tension: 30kg
4. Winding tension: it adopts the motor torque control, with the winding tension taper self-control and running dynamic tension control function.
5. Winding power: driven by 5.5kW * 2 three-phase asynchronous servo motor
6. Frequency converter: 5.5kW * 2
7. Winding drive: adopt arc tooth synchronous belt drive
8. Pressure structure: constant pressure mode, precision pressure regulating valve control.
1) Main control system: main control unit composed of PLC and weinview human-machine interface
2) Low voltage apparatus: Chint
3) Pneumatic components: adek
4) Rolling element: C3 level inlet
5) Transition guide roller: Φ 100mm duralumin alloy aluminum roller, dynamic and static balance treatment, hv700 type
3、 Main configuration list

product name

Specifications

Brand

Computer slitting machine

HDFQ-1300

Licheng

PLC PLC

motion series

Siemens

touch screen

10"

WEINVIEW

Module

motion series

Siemens

Servo motor and drive motor


China Aesthetics Division

Inverter

motion series

Hongyuan (vector frequency conversion)

Correction

Ultrasonic detector

Domestic famous

Pneumatic Components


Yadek

Rolling element

c3 level (power level)

import

Cutting method

Straight or round knife

Domestic famous

Air friction


Italy

Shafts


Domestic famous

Timing belt


Italy

Linear guide 25


Taiwan

Electronically controlled proportional valve


SMC

Precision pressure regulator


import

power switch button


Schneider

Automatic unloading device


Domestic famous

Automatic loading

With or without shaft (hydraulic)

Domestic famous




Prev: No

RuiAn LiCheng Machinery Co., Ltd.

Add:RuiAn XianJiang town QianLin industrial zone

Tel:+86-577-65033144 、+86-577-65021567

E-mail:2337972964@qq.com739459682@qq.com

Alibaba online store:http://lcjxhao.1688.com

Copyright © 2016 RuiAn LiCheng Machinery Co., Ltd. All Rights Reserved.
Technical Support:LianKe

Online Consultation

Working Day:9:30-21:00
Weekend:10:00-17:00

Online Consultation

Please leave a message
*

Title

*

Name

*

Tel

*

E-mail

*
Baidu
sogou